onetoomany

I was thinking this - if the rates are continuously falling, then I don't want to charge my battery yet - I'm better off delaying and using the spot price...

> @onetoomany although slightly off topic, Predbat will automate your Octopus Intelligent charging negating the need for such sensors. This looks very impressive but as far as I can tell...

One other solution that might be easier to implement is a “time till next cheaper rate” (ideally, the next and the next +1) - so I can judge if it’s...

Digging into this, it looks like the Solarman add-in is reading a number from a register on the inverter and the code is then adding the error message. This add-in...

Hi JobotBobica, I assume you mean Permissions>User>View User Information Its not ticked for the generic user - only the admin can see others there. The standard user pretty much has...

thanks - looks like I can use the iBoost capability to solve my challenge. If I work with iBoost, will my immersion come on under power-ups and negative pricing scenarios...

I've set up the iBoost as per the instructions, with a min power of 2.4kW and max power of 2.5kW - as its binary as to whether the immersion is...

Thanks - I'm trying out the iBoost with a lower figure of 500W. Not quite sure how that is going to play out if my immersion is fixed at 2.5kW....

I'm still finding that the iBoost is causing power to be drawn from the grid. Behaviour: 1. iboost_active switches to on, triggering immersion. I've added an extra rule to the...

The plan shows that it was predbat triggering the charge ``` 2024-03-20 15:35:01.165977 INFO pred_bat: Rate min forward looking: now 12.01 at end of forecast 12.01 2024-03-20 15:35:01.168141 INFO pred_bat:...