ollikomo
ollikomo
Yes you are right. The IOBroker adapter from Thomas is used. If you need a log again just let me know. And thanks for the quick response.
I have now updated the ESP. The FW500 is recognized but now there are lots of EMS telegrams read (Tx) and EMS telegrams written (Tx) errors. I once attached a...
I hope you mean the data? [device_entities.csv](https://github.com/emsesp/EMS-ESP32/files/9733222/device_entities.csv) The date and time are set correctly in the FW500.
Got the new build on it. After 15 minutes still no error displayed. Looks great so far. I'm still attaching a log to check. If it looks good from your...
A little note and question. I once had a FB10 attached a few years ago. But it didn't work the way I wanted. Had to remotely control the HC2 upstairs,...
I don't want to ask too much, but... I've now connected my FB10. However, it is recognized in the ESP as FR10 with 0x19. In the FW500 I set "HC2...
I'll do a factory reset tonight. and adjust according to the instructions. The only stupid thing in the instructions is that you should set the HC 1-10 (parameter 5A) first,...
I've tried everything, no matter what I do it doesn't work. But I think what my problem is. It's not the FB10 but the whole system, and I don't have...
I set 5A to 10. It is still recognized as FR10 and the error message Error 12/178 IPM coding with 10 not recognized comes in the FW500. That's how it...
a little update.. I have now inserted the FW500 directly into the boiler and reconnected the fb 10. It looks like the controls are working as they should. the only...