Max Vilimpoc

``` C:\arduino-1.6.7\arduino-builder -dump-prefs -logger=machine -hardware "C:\arduino-1.6.7\hardware" -hardware "C:\AppData\Local\Arduino15\packages" -tools "C:\arduino-1.6.7\tools-builder" -tools "C:\arduino-1.6.7\hardware\tools\avr" -tools "C:\AppData\Local\Arduino15\packages" -built-in-libraries "C:\arduino-1.6.7\libraries" -libraries "C:\Documents\Arduino\libraries" -fqbn=arduino:avr:nano:cpu=atmega328 -ide-version=10607 -build-path "C:\AppData\Local\Temp\build5f900a5af9f63d50765235bc0d0746e8.tmp" -warnings=all -prefs=build.warn_data_percentage=75 -verbose "C:\devsrc\sketch_feb06a\sketch_feb06a.ino" C:\arduino-1.6.7\arduino-builder -compile -logger=machine -hardware...

Writing single-byte causes 4-byte little-endian write by mistake.

1

`wb 0x00 1` causes four bytes to be written instead of just one.

Add Open Graph and Twitter card support to html5 backend

12

Not sure if there was further thinking on how to implement issues #199 and #503, but it is something I need in a set of pages I'm working on. So...

Hi guys, thanks for putting together this great library of parts. One thing I've noticed when using it, however, is that for most of the parts, it is impossible to...

Docker in Docker doesn't seem to find / forward the volume mounts

6

### Checklist - [X] I've looked through the [issues and pull requests](https://github.com/cross-rs/cross/issues?q=) for similar reports ### Describe your issue Using a clean Ubuntu Server 22.04.2 LTS system, running `cross` inside...

[Question]: What are the maximum specifications for the MJPEG decoder?

5

**Question** _What are the maximum specifications for the UVD MJPEG hardware decode engine, i.e. maximum frame width x height and maximum bytes per frame?_ **Observation** Passing compressed frames larger than...