nox1203

On fully updated Jessie I run the following code after boot: ``` from wifi import Cell, Scheme for scheme in Scheme.all(): scheme.delete() cell = Cell.all("wlan0")[0] scheme = Scheme.for_cell('wlan0', "nox1203", cell,...

Added print statement. I changed self.as_args() to scheme.as_args(). I got this: /sbin/ifup wlan0=wlan0-nox1203 -o wpa-psk=fdd89aca0489ddf5b88286c495371ecd695b1b341a3d1263f90e34277f02852a -o wpa-ssid=nox1203 -o wireless-channel=auto It is identical on both runs.

pi@raspberrypi:~ $ sudo /sbin/ifup wlan0=wlan0-nox1203 -o wpa-psk=fdd89aca0489ddf5b88286c495371ecd695b1b341a3d1263f90e34277f02852a -o wpa-ssid=nox1203 -o wireless-channel=auto /sbin/ifup: interface wlan0 already configured ifconfig says: wlan0 Link encap:Ethernet HWaddr 00:c1:41:31:0b:b3 inet6 addr: fe80::15ca:99a6:a787:2c0f/64 Scope:Link UP BROADCAST MULTICAST...

I was not connected. There is no inet ip for wlan. nmap 192.168.1.\* does not give anything for raspberry pi.

pi@raspberrypi:~ $ sudo /sbin/ifdown wlan0 pi@raspberrypi:~ $ sudo /sbin/ifup wlan0=wlan0-nox1203 -o wpa-psk=fdd89aca0489ddf5b88286c495371ecd695b1b341a3d1263f90e34277f02852a -o wpa-ssid=nox1203 -o wireless-channel=auto Internet Systems Consortium DHCP Client 4.3.1 Copyright 2004-2014 Internet Systems Consortium. All rights reserved....