nourmehdi

@formatBCE i have M531 lock the adv changes with lock opening and closing but as i said , when i was reversing i found that there's two kinds of lock...

> I tested on my device and I confirm that the adv does not change on manual operation. @formatBCE , in your case I see that it changes from opened...

Another thing , i tested my esp32 via console , 3 times read command , 3 successfull doneread result , no failure , could you confirm wich tasmota version you...

I'm on 9.5.0 release and is veeeery stable , one tasmota golden rule if your current version works well dont update because it can causes a lot of trouble ,...

> OK I'll try it and see how it goes... Perfect i will wait for your feedback

@formatBCE good , with 9.5.0 still got the connectfail issue ?

@rospogrigio weird very weird mine is working veery good , wich tasmota firmware have you installed on your esp32 because there are many variants ?

@rospogrigio perfect i'm pretty sure is a more a matter of power adapter than distance , mine is at 1.5m not direct sight (separated by concrete pylon) , and it...