nmakel

Hey Artur, was there an issue that needs to be fixed?

> Hi, thanks a tonne for this project, it's quite awesome! Thanks! > I've used your sample influx script to dump the data to influxdb, and have Grafana plugged in...

> What docker image I need to install or build with python? You don't *need* to run the script in a docker container. What error are you getting when you...

> ooo, then again, I'm not sure that its successful! It certainly isn't :) Are you sure Modbus TCP is enabled, the port is correct, and that the modbus address...

> yup, sees to only be listening on 80 and 8080 - and those are a sink. Unless you have access to the setapp interface on port 80 you'll need...

Interesting! Thanks for sharing the document. Most of the battery registers are already supported, and I will take a look at the power control registers. Displaying the status should be...

I haven't had time to work through all of the storage and export control document. Feel free to send a pr. > I just tried adding a line in init.py...

> Sorry, I didn't mean to push at all, I just read about the added parameters in the new release and wasn't sure if the code was working correctly with...

> Sorry, I still don't get the concept behind the batch number: When I look at all the entries, the number seems to increase from 1 to 4 every few...

I hope to have time this weekend to start adding some of the other registers.