Niels Faber

The log suggests you have made a schedule for an input_select. Apparently the schedule is triggered on startup (probably due to an active timeslot) but the input_select integration is not...

Sorry for not responding to this issue before. I haven't been very active with this project lately. I don't really understand the issue you are pointing out. There are no...

@balloob Thanks for the response. I understand the function of the allowlist, I also think it’s purpose should be kept. The problem I’m raising is the fact that it’s a...

I gave implementing this a try but also quickly gave up on it, and found a workaround to do this for my custom_components in the meantime. IMHO I still think...

In alarmo use `data` instead of `service_data`. I think you have updated to v1.9.5 but the alarmo panel still shows v1.9.4 due to a caching issue. Try clearing the browser...

Did you set up Alarmo with multiple areas? If so, the sensors need to be assigned to the correct areas. Otherwise, please enable debug logging by adding this to the...

Can you please add logging of the opening of the window and then arming the alarm? It is apparently not detected by Alarmo. A screenshot of the settings of this...

Alarmo only checks the sensor when needed, so when the alarm is disarmed you will not see any logging of the sensor changes. But you should see something if the...

> I thought that if I already have an opened window, Alarmo won't arm because of this opened window, but maybe it works as intended and it's a feature to...

The same settings would give the same results. There must be some difference which we are overlooking. But from here it's difficult to identify this. Did you select the appropriate...