nick9one1

DG03 ONVIF settings

2

Hi, First of all, thanks for all the hard work people have put into this project. I have two GD-SC03's that were in a box until I discovered this! Unfortunately...

## Current Behavior When using the new Magnetmeter page to set the direction of a BN880 it is incorrect and 90 degrees out ## Steps to Reproduce 1. calibrate mag...

magnetometer page does not represent correct mag direction

1

## Current Behavior When using the new Magnetmeter page to set the direction of a BN880 it is incorrect and 90 degrees out ## Steps to Reproduce 1. calibrate mag...

Issues uploading firmware

2

I managed to flash the bootloader ok ``` C:\Users\Nick\Downloads\avrdude-6.3-mingw32>avrdude` -patmega328p -cusbasp -U lfuse:w:0xFF:m -U hfuse:w:0xDE:m -U efuse:w:0xFD:m -U lock:w:0x3F:m -U flash:w:optiboot_atmega328_8mhz_57600bps.hex avrdude: warning: cannot set sck period. please check for...