mce-adapter
mce-adapter copied to clipboard
necroware
RGBS converter for MDA, Hercules, CGA and EGA
I got this email today. I wanted 5 (min qty) of those adapters fully assembled. Could you please update your BOM File please? ``` Hi, Thank you for choosing PCBWay!...
  Although it seems a bit late to use this model now, I still believe it could be helpful to someone. This printable model is designed for MCE...
Add short and very short layout. Not tested yet, but should work. Both use PLCC Chip and vertical Resistors and Diode. Very short has no USB-Power, no RGBS function (so...
If you ever make another revision of this board, it might be worth adding a jumper to enable/disable sending 5v to pin 9 of the VGA connector. This would make...
 I used the MCE adapter with an IBM EGA card. The IBM EGA card's jumper settings are set to EGA monitor.
 poor but usable
It seems C2 = 1uF is too low for C-Sync to work properly. Please see attached graph    Apology for...
