nean

This is indeed a duplicate issue. Has there been any update or progress apart from the comms in #89 since this seems to be open for quite a while? To...

should be by default `"indent_offset": 10 ` as it is a quite annoying issue

Most smartmeters and/or setups use dedicate separate values for `power consumption` (power from grid) and `power return to grid` , so I don't quite understand the design decision from go-e...

@syssi , interesting, the MEP implementations I know (at least Austria, Denmark, Norwegian regions) all work with forward and reverse registers. Might be dependent on the implementation of the P1...

Ohh, I see, SML (vzlogger, I guess?), but looks like older one, however according to the manual it is capable to provide separate 1.8.0 forward power and 2.8.0 reverse power...

hi, awesome, thanks for picking up and implementing that rocket fast! I think there is great potential behind this idea. I switched to 1.20 brunch and will help with testing....

ad. kwh counter I've running with `switch => 5` and `fakemaster = 2` and see the counter in debug output every x seconds so it might not need to be...

Are there recommended policy settings for `config.json` I should use for passive mode power-measure / always-charge-with-full-speed as default and maybe stop via interaction or after a timer (eg. 8h) run...

> hi, > > awesome, thanks for picking up and implementing that rocket fast! > I think there is great potential behind this idea. > > I switched to 1.20...

> I have just committed (in commit [83bd6ff](https://github.com/ngardiner/TWCManager/commit/83bd6ff65b15bec45ce1c8811b5bb0f66c12da26)) some new code that will: > > * Record the Lifetime kWh and Voltage per phase for each Slave TWC > *...