nbullus

Results 48 comments of nbullus

I forgot to check what happened at 00:00 to see if it simply enabled the existing schedule, or updated the schedule and enabled at 01:00 next morning. I've seen it...

Trefor. Although not directly the cause of this issue, I do want to point out the fact that charge schedules are not being defined/enabled 30 mins before they are due...

I think the question has now been answered. The charge schedule is being enabled more than 30 mins before its due to start as shown in the previous screenshot.

Here is a more recent example on a much simpler Flux tariff. The charge schedule is both wrong and still Enabled. ![image](https://github.com/springfall2008/batpred/assets/159952349/d6dcbae0-f09f-420c-b1df-9114c144f3f3) GivTCP confirms a charge schedule was enabled at...

No issue with PV charging the battery with surplus solar. 'Inverter SOC Reset' option has always been enabled for me. I agree its fine to set the charge schedule times...

> Interesting, this seems a hardware dependant issue. From an AC3 perspective, when I was on a predictable tariff such as GO, it was my preference to maintain the charge...

Just to avoid confusion, I made a mistake when I stated "The battery can now no longer charge with surplus solar later on as planned before 19:30". What i mean...

GivTCP Log below. Errors are apparent but this is when I reset/restarted everything. I can see no errors around the time it changed state to discharging (09:45) and remained in...

Now seeing same behaviour at v7.17.4 in that its stuck in Freeze Discharge yet plan states it should be Discharging. ![image](https://github.com/springfall2008/batpred/assets/159952349/789e443e-e699-4069-baab-e0b4b2c84e96) GivTCP Log: 2024-04-29 10:40:10,772 - Inv1 - write -...

I have put it into 'read only' and back again. This got it discharging correctly again until 11:30. At 11:33 it went into 'Freeze Discharge' and this was OK and...