nasbdh9

``` make[3]: Entering directory '/home/nasbdh9/x86/package/libs/libmnl' mkdir -p /home/nasbdh9/x86/staging_dir/target-x86_64_musl/root-x86/stamp echo '0' | cmp -s - /home/nasbdh9/x86/staging_dir/target-x86_64_musl/pkginfo/libmnl.version || { echo '0' > /home/nasbdh9/x86/staging_dir/target-x86_64_musl/pkginfo/libmnl.version; } SHELL= flock /home/nasbdh9/x86/tmp/.root-copy.flock -c 'cp -fpR /home/nasbdh9/x86/build_dir/target-x86_64_musl/libmnl-1.0.5/.pkgdir/libmnl/. /home/nasbdh9/x86/staging_dir/target-x86_64_musl/root-x86/'...

Without this, frequently disable and enable NIC in windows would get a bunch of ip that were already assigned but invalid, so I upvoted this patch

Not configuring `CONFIG_SND_SOC_MT6359` causes build break If you just change the default governor, can edit it manually

> @nasbdh9 - I test built it and did not get an error. I added that line back and adjusted the PR. `CONFIG_SND_SOC_MT6359` It should be left as is, not...

``` root@OpenWrt:~# cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor ondemand ondemand root@OpenWrt:~# cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_available_frequencies 300000 437500 600000 812500 1025000 1137500 1262500 1350000 300000 437500 600000 812500 1025000 1137500 1262500 1350000 root@OpenWrt:~# lscpu Architecture: aarch64 CPU...

It is best if stock u-boot can be replaced like Linksys E8450

Have you tried a new version of Google Package Installer, such as https://www.apkmirror.com/apk/google-inc/package-installer/package-installer-11-7276604-release/ If there is no problem with the new version, may be able to update to this

The current partition capacity should be enough to install pico

Same error here https://github.com/openwrt/openwrt/issues/15393

> Maybe this? [0da199f](https://github.com/openwrt/openwrt/commit/0da199f60c47a4b861562ffec3842535eb56a67b) > > Have to check the device Can confirm that MAC address cannot be read correctly starting from b649b0bf7100bdc6adb7e857c74738cab7c47b4c