nandox5

When i use the setup.bin i get a message about AMT already being provisioned and it fails. Even though the machine is not in a provisioned or active state... any...

Also, any solutions for wireless ACM method? our laptops don't have ethernet ports

Thanks for the reply. I have Meshcentral setup with all requirements for ACM, DHCP option 15, paid cert etc... I was able to successfully get one machine into ACM. While...

Okay, i have installed and reinstalled the agent multiple times that i probably broke something.. so for sake of troubleshooting, i have removed the Agent, Removed the mesh install folder,...

Oh, a special note. This machine was provisioned through a different server before with CCM. So i did the ACUconfig unConfigure to remove provisioning. I also tried sending the Unprovision...

You are legend! it worked on 1 out of the 2 affected test machines.. opening the LMS tunnel i was able to kick start the CCM deactivation and ACM activated...

tested this on two identical machines and both failed with same error version is v16.0.15, sounds like it's related to AMT.. which is weird because when getting the root cert...

I added the configuration above to the config, it was not there, how can you tell which method (legacy or HostBased) was used? On a side note.. while testing activations....

 Ran into this new error message on a brand new laptop with v16. This time i tried the setup.bin method. EDIT: Tried another newer but not as new machine...

`"tlsAcmActivation": false` fixed the error 408 error on laptop with v15. It's now on ACM. (done with setup.bin)  new laptop that is on v16 still did not work, giving...