nandinid-msys

I gone through this issue, We can create an ebgp session by using a static peer connection instead of the ebgp-multihop/disable-connected-check command. Considering that there won't be any impact on...

According to my observations of dynamic peer behavior, an ebgp session won't comes up if ebgp-multihop or disable-connected-check are not used. can you please share the details for reproducing this...

Even if a fix were made to propagate directly connected routes (where the outgoing interface has no IP address assigned) from the kernel to the BGP routing table, it would...

In latest version is not reproduced, i did the same configuration and added new prefix list it's shown correctly in show running-config. In that there is no duplicate routes .

Hi @tomaszmrugalski could please check this issue

Hi @andrei-pavel Could you please take a moment to review it when you get a chance? Thanks in advance.

is this issue still open ?

> Someone needs to verify it. Could you? yes, @ton31337 i will try

I ran through this issue, Abruptly shutdown a high number of bgp peers at the same time by using iptable clis it will block the traffic. after that i flush...

I am trying to recreate this issue. I am trying to simulate a network event where a large number of BGP peers are shut down and then brought back up...