Matteo Naldoni

im following

``` python3 gopro_dataset_example.py ~/Scrivania/rccar.MP4 Creating video stream from /home/naldoxable/Scrivania/rccar.MP4 Creating gyro stream from /home/naldoxable/Scrivania/rccar_gyro.csv Post processing L3G4200D gyroscope data to remove frequency spike noise Creating calibrator Estimating time offset and...

hope you can fix that, i need this in combination with the gpmf extractor to defeat reelsteady go :)

fix with frame_out = cv2.resize(frame_out, (int(frame_out.shape[1]/2), int(frame_out.shape[0]/2)));

Check the display cable connection, double check the pinout with a multimeter and be sure that the power enable pins are shorted. Do not forget to plug the battery in!

Ok so the connection should be ok. Try to disconnect the battery, then click on Check MCU and only then plug the battery in. I'm assuming that you set the...

I have a bbs02 controller, not so experienced but I'm developing a custom display, esp32 based, with more features :) Hope to publish the project soon.

Oh.. so you're trying to replace the original firmware and you have never clicked on Download/Program button? This eliminate any fault by you.. It seems a defective unit. I suggest...

Last chance, try a different usb-serial adapter, maybe an FTDI. I know that it works for the configurator but the firmware programming occurs at an higher baudrate which may cause...

Where is located that file? I'm not finding the folder nextcloud.