mzfffff

原来我是使用clash带分流规则的的配置文件可以正常代理，但这个文件用clashmeta可以加载但无法代理。 于是在GitHub上找了一个可以在clashmeta的配置文件进行修改，结果还是一样。 [TCP] dial 🪜 代理域名 (match RuleSet/proxy) [::1]:59993(chrome.exe) --> www.youtube.com:443 error: connect tcp [2a03:2880:f10e:83:face:b00c:0:25de]:443: no route to host context deadline exceeded

> 把你的代码用代码标志符括起来再发一次 ``` proxies: {name: "WARP1",type: wireguard,server: 2606:4700:d0::42aa:6b00:7090:58d1,port: 988,ip: 172.16.0.2,public-key: XXXXXXXXXX,private-key: XXXXXXXXXX,mtu: 1280,udp: true} {name: "WARP2",type: wireguard,server: 2606:4700:d1::fe7c:1766:a153:8676,port: 946,ip: 172.16.0.2,public-key: XXXXXXXXXX,private-key: XXXXXXXXXX,mtu: 1280,udp: true} {name: "WARP3",type: wireguard,server: 2606:4700:d0::5708:ca0d:aa69:7d05,port: 988,ip: 172.16.0.2,public-key:...

> 所以mihono的文件config.yaml到底要怎么写才能导入啊，其他软件只要点两三下就可以，这个我学了好几天，以为只要配置文件导入一下订阅链接就了，结果越整越迷惑……想问以下是什么，你的mihomo.service/是怎样启动的呢？我什至连个服务都无法在ubuntu中启动成功，哭死了... 这个配置文件应该没什么问题，是软件对WG支持不太行。 这是我从GitHub上抄了自己改的 主要是proxies:中的代理换成你自己的，然后把代理中的name值填到proxy-groups:就行，Ubuntu上应该没问题。 还是不行把TUN整个删了，只使用socks5。 ``` proxies: - {"name":"hkhy2_1","type":"hysteria2","server":"域名.eu.org","port":"51725","up":"100 Mbps","down":"500 Mbps","password":"XXXXXXXXX"} - {"name":"hkhy2_2","type":"hysteria2","server":"域名.eu.org","port":"51562","up":"100 Mbps","down":"500 Mbps","password":"XXXXXXXXX"} - {"name":"hktuic1","server":"域名eu.org","port":"32061","type":"tuic","uuid":"XXXXXXXXXXXXXXaa44-XXXXXXXXXXXX","password":"XXXXXXXXXXX","heartbeat-interval":"10000","alpn":["h3"],"udp-relay-mode":"quic","congestion-controller":"bbr","sni":"域名eu.org"} - {"name":"hktuic2","server":"域名.eu.org","port":"32023","type":"tuic","uuid":"XXXXXXXXXXXXXXXx4-aa44-XXXXXXXXX","password":"XXXXXXXXXX","heartbeat-interval":"10000","alpn":["h3"],"udp-relay-mode":"quic","congestion-controller":"bbr","sni":"域名eu.org"} - {"name":"ushy2_1","type":"hysteria2","server":"域名.eu.org","port":"55888","up":"100 Mbps","down":"500 Mbps","password":"XXXXXXXXXXX"} - {"name":"ushy2_2","type":"hysteria2","server":"域名.eu.org","port":"55961","up":"100 Mbps","down":"500 Mbps","password":"XXXXXXXXXXXX"} - {"name":"ustuic1","server":"cc.z3505.eu.org","port":"32037","type":"tuic","uuid":"878xxxxxxxxxxxxx579cxxxxx","password":"XXXXXXXXXX","heartbeat-interval":"10000","alpn":["h3"],"udp-relay-mode":"quic","congestion-controller":"bbr","sni":"域名eu.org"}...

> > > 所以mihono的文件config.yaml到底要怎么写才能导入啊，其他软件只要点两三下就可以，这个我学了好几天，以为只要配置文件导入一下订阅链接就了，结果越整越迷惑……想问以下是什么，你的mihomo.service/是怎样启动的呢？我什至连个服务都无法在ubuntu中启动成功，哭死了... > > > > > > 这个配置文件应该没什么问题，是软件对WG支持不太行。 > > 这是我从GitHub上抄了自己改的 > > 主要是proxies:中的代理换成你自己的，然后把代理中的name值填到proxy-groups:就行，Ubuntu上应该没问题。 > > 还是不行把TUN整个删了，只使用socks5。 > > ``` > > proxies: > > - {"name":"hkhy2_1","type":"hysteria2","server":"域名.eu.org","port":"51725","up":"100...