Matthew Wielgus

There are two [CMAC 100G MAC](https://docs.xilinx.com/r/en-US/ug974-vivado-ultrascale-libraries/CMAC) blocks adjacent to the OpenCAPI GTY Quads 131 and 132 so it should be possible to implement dual QSFP modules using the SlimSAS OpenCAPI...

@ciclonite which version of the board do you have (what is the DDR4 FBGA Code)?  I am currently working on getting the OpenCAPI interface working correctly using [OpenCAPI](https://github.com/mwrnd/OpenCAPI_Breakout) and...

> revisions who some of them have huge differences of the Memory implementations I am aware there are 4GB models but if the 8GB models have different memory implementations then...

[Issue #3](https://github.com/mwrnd/innova2_flex_xcku15p_notes/issues/3) is a more in-depth discussion of these issues.

I am reading the same voltages on a powered up (in-system) board with no JTAG connected. Please confirm your JTAG runs at 1.8V and [works with Xilinx parts](https://docs.xilinx.com/r/en-US/ug908-vivado-programming-debugging/JTAG-Cables-and-Devices-Supported-by-hw_server). If possible,...

[Kintex UltraScale+ devices have a lower maximum internal JTAG frequency](https://github.com/eugene-tarassov/vivado-risc-v/issues/97#issuecomment-1202976993) than other UltraScale+ devices and this may be the reason behind the slower JTAG clock. I have been running my...

Thanks [michalkouril](https://github.com/michalkouril)! I first tried shorting the header with a 1k resistor and then a proper short and both caused the board to boot into Firmware Recovery Mode. Thanks for...

Thanks @gparmeggiani! I [have updated the notes](https://github.com/mwrnd/innova2_flex_xcku15p_notes/blob/main/README.md#fan-pinout) and will try using the fan when I get a chance.

Yes, unfortunately the boards have been EoL'ed and none of the links work anymore. [MNV303212A-ADLT and MNV303611A-EDLT EOL Notice](https://network.nvidia.com/pdf/eol/LCR-000885.pdf) [MNV303212A-ADIT and MNV303212A-ADAT EOL Notice](https://network.nvidia.com/pdf/eol/LCR-000437.pdf) I believe I captured all the...

I [explored this avenue](https://github.com/mwrnd/innova2_flex_xcku15p_notes/issues/1#issuecomment-1335562330) but gave up when it looked to be a [proprietary and controlled option](https://github.com/acsl-technion/flexdriver-zuc/issues/1). Although not the same thing, I was able to use the [OpenCAPI connector...