Merijn Vandenabeele

Variable not respected in rule evaluation

1

I have a boolean global variable that is set when we're on holidays, so the blinds would go up a bit later. This would allow us to get a little...

Manual input position of the sun

5

I'm testing the blind-control node and I would like to evaluate its behavior based on different positions of the sun. It would be nice if I could feed the sun...

Blinds not opening in the morning

7

I have 2 rooms, one with 4 blinds and one with 3. From time to time, one of the blinds doesn't open automatically (not always the same one). They are...

Hi I have several 4-channel dimmerpacks with 3 extra control channels. The values of those control channels must be 255, 0 and 255 for the dimmerpack to operate as a...

Position feedback input

2

Hi Thanks for sharing your work on this blindcontroller. I was wondering if it would be possible to add a position feedback input. I'm planning to control some KNX blinds...

I needed an easier way to position my vinyl cutter. With relative movement in X and Y direction, I can first manually put the knife at (0,0) on the vinyl...

Change field order for Int64 alignment on ARM processor

feat: Add support for service connect timeouts

1

This pull request will add support for a timeout block in the service block of service_connect_configuration. Default idle_timeout_seconds = 300, per_request_timeout_seconds = 15 as defined by AWS. These values are...