mux

@nerijus, glad to hear it's working for you, is CONFIG += system-libqatemcontrol supposed to replace CONFIG += c++11 in Atem.pro and so on with other .pro files?

i'm using https://github.com/Zebiolo/client/tree/next-fix/upgrade-libqatemcontrol-linux with diff edits & i just keep getting: /// In file included from ../../src/Gpi/GpiDevice.cpp:1:0: ../../src/Gpi/GpiDevice.h:7:10: fatal error: gpio/serial_port_device.h: No such file or directory #include ^~~~~~~~~~~~~~~~~~~~~~~~~~~ compilation terminated....

I had a similar experience with D1 Mini until flashing an earlier version https://github.com/mtongnz/ESP8266_ArtNetNode_DMX.git I was then able to upgrade/update to ESP8266_ArtNetNode_v2 through Web UI OTA

glad it's working! i connected mine to a $2 max485 module & it's been working well with 90 channels (15 fixtures) have fun! On Mon, Mar 16, 2020 at 6:57...

are you compiling it for the 'LOLIN(WEMOS) D1 R2 & mini' board? On Tue, Mar 31, 2020 at 1:16 PM Hitower78 wrote: > Hi ther! > i want to try...

i'm using Arduino 1.8.10 may want to try downgrading

i've experienced occasional signal interruptions if it's real bad, you may have a & b on the rs485 module/transceiver On Mon, May 4, 2020 at 1:53 AM Hitower78 wrote: >...

...reversed On Mon, May 4, 2020 at 8:16 AM robb wrote: > i've experienced occasional signal interruptions > if it's real bad, you may have a & b on the...

i had better stability with the older version too i was only using one dmx output it's a great project but there're quite a few open issues & the last...

Have you swapped tx & rx? I've made that mistake before. On Wed, Sep 15, 2021, 3:40 PM Daniel091988 ***@***.***> wrote: > Hello > > I Flashed the Wemos D1...