ROIG

excuse me, didn´t notice, hope i did´t bother you too much ;) El dom., 26 abr. 2020 a las 23:17, hroff-1902 () escribió: > Don't you see the project is...

thanks Kris for quick answer. The hardware is Arduino 1 with LSM9DS0 using a logic converter 3v-5v. The firs code i used was the simplest one from sparkfun which uses...

Hi Kris, followed your advice and began from striped version so I could isolate the problem. The thing is that changing serial print/display rate I solved the problem. Don't really...