Murk
Murk
It's only to simulate a fan failure - fans on all my printers are all functioning flawlessly, so I just needed a reliable way to reproduce the issue. To clarify,...
I'd like to reiterate the issue is NOT related to the fan or print settings at all - those are just steps to reproduce the issue by forcing the warning...
Issue reproducible on 6.0.0, just need to select no when exiting experimental menu so the printer doesn't restart. Opening "Move Z" menu doesn't appear to affect it, only the experimental...
Haven't retested recently, but as said before it's a minor issue but it may block important warnings/notices from appearing.
Ran some tests on the Mini and monitoring output with Pronterface. On one of the axes I have loosened the screws to ~15 Hz lower after the fourth test (ran...
I believe the default should just be to turn off the nozzle immediately, and that a setting is not required for this. More info from an issue I opened below....
@bkerler But the bed isn't heated on changing filament, unless that was changed again recently. It used to, which was an annoyance for a while for many users, including me....
Bumping to keep open
This feature would probably work best as a M600 variable that can be set to unload only - this way the printer also knows that it doesn't actually have filament...