Oyvind Amundsen

Thank you - did add image on each side and a pi pico from grabcad :-)  

ok :-) Have ordered a Tiva C , LCD and Pico As a first step I hope to get the LCD working in combination with my grblHAL Pro

Yes 😊 Possible to get it with the MSP430 programmed? Would like to test it with my laser project based on the grblHAL Teensy 4.1 Pro controller I have the...

Is Grbl v1.1 jogging supported by grblHAL ? https://github.com/gnea/grbl/wiki/Grbl-v1.1-Jogging

Possible to use something like this? https://www.aliexpress.com/item/32635207928.html?spm=a2g0o.detail.1000060.1.6d4733dc9chmPd&gps-id=pcDetailBottomMoreThisSeller&scm=1007.13339.169870.0&scm_id=1007.13339.169870.0&scm-url=1007.13339.169870.0&pvid=af4624f1-85fd-40f5-8538-35733463f9a3&_t=gps-id:pcDetailBottomMoreThisSeller,scm-url:1007.13339.169870.0,pvid:af4624f1-85fd-40f5-8538-35733463f9a3,tpp_buckets:668%232846%238111%231996&&pdp_ext_f=%7B%22sceneId%22:%223339%22,%22sku_id%22:%2210000006002568188%22%7D less wires - Seems like different keys gives different ohm values?

Ok only an idea - I guess it’s best start with the same setup you use Last ned Outlook for iOS ________________________________ Fra: Terje Io ***@***.***> Sendt: Thursday, January 13,...

Does/can the LCD show other live status information when not in MPG mode ? Job % Alarm messages Use some of the buttons for functions like CycleStart, Feed Hold..?

I have the PI, LCD.. Have to buy som eresistors.. So almost ready for the pcb :-)

Sent e-mail :-)

All parts arrived + a hot air soldering sation.. Hope to get some spare time soon - so I can get this pcb ready