MSXmakers!

Hi, There are some differences between the current PCB (v1.1) and the schematic, so, even if I generate a new BOM from schematic, fits with your document here but not...

It would be possible taking advantage from the SD & floppy circuits from the N8 project? https://www.retrobrewcomputers.org/doku.php?id=boards:sbc:n8:n8 It would be great having a hard disk included in the mainboard.

I think we can add a pin header in future OMEGA versions, something like a third cartridge but I / O. Several people would like to have a disk system...

What I'm suggesting is a way to connect a floppy interface (or another disk interface) without loosing a slot card on it. My suggestion was to have an internal i/o...

Hi Guys. I have a new FDC controller design for the omega MSX based on Microsol CDX-2 FDC by port. I have two version for this controller board, as slot...

@dude22072 yes, but I need time enough to do it. send me an email to have the gerbers, please.

https://www.msx.org/forum/msx-talk/hardware/fooling-f4-register

👏👏👏👏 El lun., 2 mar. 2020 a las 23:09, Sergey Kiselev () escribió: > https://www.msx.org/forum/msx-talk/hardware/fooling-f4-register > > Well, that's what I did (even before reading that post). It is interesting...

Placing the expanded RAM on the subslot 3-1 is quite easy on the omega, I was modifying to 3-0 just for fun and its easy to test if 3-1 helps,...

Hi, the size of your files should be 512K, the correct size to burn a SST39SF040, if not, you should check each file introduced to the script, if they are...