msepulve

@rkoe said: “gofabmo looks interesting, but seems to be tailored to their hardware. I got it running, but then it told me to "press the green button for some seconds"......

@justinclift thank you very much for your comments and recommendations. When starting FabMo, it automatically uploads to the Due the firmware (g2.bin which is a g2core bin compiled with the...

Sorry for the miss alignment on the table. I wasn’t able to correct them.

@justinclift Thanks a lot Justin. I will try it tonight and let you know the result tomorrow around 15:00 GMT

@justinclift Good news! I compiled a first version changing only the configuration for the dir and step in the sbv300_pinout.h and I got output (connecting a Led) in the three...

@justinclift I apologize for the early claim to sucess, with the compiled versions of g2core for the sbv300 and use with FabMo. I later realized that those firmwares were never...

Sorry, the original issue is #634 posted by Domingo

Here is what is seen in the terminal terjeio, Backtrace:0x4008AF4D:0x3FFB1870 0x40086735:0x3FFB1890 0x4000BFED:0x3FFC92E0 0x40090612:0x3FFC92F0 0x4008DD72:0x3FFC9310 0x40126FFF:0x3FFC9350 0x401160B8:0x3FFC9380 0x4011616F:0x3FFC93A0 0x400903A5:0x3FFC93D0 E ([1706096](tel:1706096)) task_wdt: Task watchdog got triggered. The following tasks did not...

Thanks terjeio. Tryied values 200, 150, 100, 75 and 25 to no avail. The same problem keeps coming. Should you have any ideas please let me know.

Let’s add that in order to be absolutely sure that the Tiny Bee was not a problem, I downloaded today firmware from the Web Builder that uploaded to the TB...