Miguel Risco-Castillo
Miguel Risco-Castillo
The important question is why the printer doesn't know the current position, maybe the axes stepper drivers were disabled.
> **Additional context** > I had a quick look at the the code and I can see that this is happening because that bool is probably false > `const bool...
> Below there is a snippet from my gcode file that didn't park the head. But before of the movements, were the axes in trusted state or not? When the...
No more feedback
> After several seconds, with the hot end not yet at the 240 target, all 3 axes resumed blinking "-?-". Great point, I was looking for why some people have...
So the general advice is to move the G28 after all temperature settings in the start G-code script. Please check the suggested start G-code script here: https://github.com/mriscoc/Ender3V2S1/wiki/Slicer-G-code-Scripts
> Once the hot-end gets up to temperature, the oozing definitely starts to one degree or another with all of the filaments I use. You can change a little your...
It could not be LA but the Juntion Deviation.
No more feedback
Possible duplicate of https://github.com/mriscoc/Ender3V2S1/issues/195 and https://github.com/mriscoc/Ender3V2S1/issues/198