Marco Paland
Marco Paland
`net.ipv4.ip_forward` was/is already set, as the system is mainly a router, but a good idea anyway. The whole issue is a bit strange, I attach a second log, where is...
Seems to be codec selection problem, somehow. I'm still testing.
Adding codec setup in the [general] section fixed the problem. ``` disallow = all allow = g722,alaw,g729,ilbc,ulaw ``` It seems, that without these lines alaw is taken as default codec,...
You are right, I had no codecs in the [general] or in the [line] section, just in the device section template. I assumed, the device would override the [general] level....
Seems to be an ilbc codec related problem. Other codecs work fine.
Hi Diederik, no rush. I used ilbc a lot over VPN connections, cause it has a good sound quality while having low bandwidth, a fairly goog jitter / packet loss...
Interesting, I didn't know, how codecs are mapped - my first guess would have been by a fixed codec code. I don't understand why Cisco calls iLBC "G.729B Low/ILBC", as...
Jeeez, I see. Unfortunately I haven't used ilbc that explicit like in the test, it was always in the list among the others, so I don't know what coded was...
I tested branch/553 and it's not working, no RTP flow. Below is the trace from to *43, device to device is the same. ``` -- SEP00270DBD6712: Accessory 'Handset' is 'Off...
Ah, I see. Okay, that's no problem, I grab my old Cisco UC520, hope that any Flashcard is still working, create an iLBC call and record it. By the way,...