Takao Akaki

Hi, I think that the cause is that the driver disappears by updating firmware. Try the following commands. cd /usr/src sudo dkms install aiy-1.1 sudo dkms install aiy-vision-1.1 sudo dkms...

Hi @andrewtvuong Sorry I couldn't help you. If there is a driver it is a different case from me.I have written something unrelated to this Issue.In my case,the following command...

Label Test

Updated to M5Unified-compatible audio and talk samples.

Speaker(spk_cfg) may not need it, but as for M5.begin(), beginners are not familiar with M5Unified's Config method, so it is better to write it.

Yes, it is. It is indeed hard to understand. Until the M5Unified's documentation is more solid, I'll try to supplement it with a few comments.

Hi, Thanks for your issue. This is an omission that was corrected when the library was changed to M5Unified. Please incorporate the following modifications until the pull request is applied....

They are connected via the TFCard (not SDCard) SPI interface used by the M5Stack. The points to note are as follows - There are some SD cards that are not...

I confirmed that the M5Stack Faces Fingerprint Module works with UIFlow 1.4.0 Beta. Is there any difference because Example doesn't work with ArduinoIDE?

I get this error because the boot.py in the result of the detector is wrong. https://github.com/sipeed/maix_train/blob/762b9771f13d7a6a73ab0f71435b32d2c011c262/train/detector/template/boot.py#L72-L73