Leo Moser

Angle checks

11

I'd like to make a doodle for some chip art, and I'm wondering if I can use non-manhatten geometry on TopMetal2. In the layout rules it is stated under 3.1...

QA cells: misunderstanding in Gat.b1 rule

2

The GatPoly Gat.b1 rule is defined as follows: | Rule | Description | Value | |--------|-----------------------------------------------------------------------|-------| | Gat.b1 | Min. space between unrelated 3.3 V **GatPoly** over **Activ** regions |...

It seems that the KLayout LEF/DEF mapping uses the wrong layer:datatype pair for `DIEAREA`: https://github.com/IHP-GmbH/IHP-Open-PDK/blob/4c6508d03a3078b21c737d04fae5dccec9aa590f/ihp-sg13g2/libs.tech/klayout/tech/sg13g2.map#L154 235:4 is the layer:datatype for `prBndry` from sky130: https://skywater-pdk.readthedocs.io/en/main/rules/layers.html Taking a look at the "SG13G2...

Add an entry to the `sky130 Efabless` menu to extract and save the netlist without performing LVS. `report_netlist("extracted.l2n")` seems to be the correct function.

The resistance shown in the `poly_res` PCell does not match the one that is displayed in xschem for the same W/L.

KLayout extracts the wrong length for the `poly_res` PCell (compared to what is set as the parameter for L). The issue is more noticeable when L is small. The issue...

Hello! I have a few questions regarding the IP selection: > 3. The maximum area below 2 mm2 preferred (larger designs only if area is available) Which means we can...

Feature request: `-connect_to_pads` option for `add_pdn_stripe`

7

### Description I'm not sure whether my request makes sense, so I'll describe the use case: For my latest chip [Greyhound](https://github.com/mole99/greyhound-ihp/tree/main) I used a PDN ring that connects to the...

`place_pins` does not place pins directly between macro pins and boundary in some cases

9

### Describe the bug This problem actually occurs with a design in OpenLane 2, but since I can reproduce it standalone, I opted to file it as such. The general...

Login takes forever

1

### Steps to reproduce Since around two weeks ago, trying to log into our self hosted server just loads forever. Previously this worked fine.  I then need to click...