Matthew O'Gorman

fan only mode I measured the following. i felt and saw no change with these settings. with 0 for all settings ``` auto: 318w low: 315w med: 316w high: 316w...

I was able to set fan speeds with the factory controller in the past. my ducts are not great so i have to set it very high, 200s to feel...

is that just setting is_slave_controller: "true" and connecting the remote to same bus line?

a long time later the in motion falls off and the config changes to this  Moving car makes pattern return  ``` Jul 11 00:13:05 bob homeassistant[2968776]: 2024-07-11 00:13:05.264...

i made pr of their change so its easier to view / merge

1f6295d54f744c58a2d8cd83ca26bdf4 is the stationary beacon address 1f6295d54f744c58a2d8cd83ca26bdf5 is the moving beacon address the captures were like you requested. moving, and then settled. [config_entry-bermuda-4779a3acd65447282319fa6f0c573205.json](https://github.com/user-attachments/files/16279013/config_entry-bermuda-4779a3acd65447282319fa6f0c573205.json) [config_entry-bermuda-4779a3acd65447282319fa6f0c573205(1).json](https://github.com/user-attachments/files/16279012/config_entry-bermuda-4779a3acd65447282319fa6f0c573205.1.json)

> Does M-x apheleia-format-buffer insert compile info into the buffer? I was able to reproduce it by calling that by hand. > Disable +format-with-lsp-mode (with M-x +format-with-lsp-mode) then try M-x...

the bit you gave me seems to solve issue in eglot mode, would something similar work in lsp?

i spoke too soon. error still happens with eglot

anything else i could try?