Matthew O'Gorman

+1 to this feature request. I use gtile and would love to get back the extra real estate

i did this with a template ``` {% if state_attr('sensor.lina_area', 'area_name') == None or is_state_attr('sensor.lina_area', 'area_name', 'unknown') or is_state_attr('sensor.lina_area', 'area_name', 'unavailable') -%} {{ states('sensor.lina_filtered') }} {%- else %} {{ state_attr('sensor.lina_area',...

The remote I used before setting up esphome was [PREMTC00U](https://lghvac.com/residential-light-commercial/product-type/model-details/?productTypeId=a2x44000003XR2A&modelId=01t4400000Ari4c&modelNumber=PREMTC00U&iscommercial=false&class=Controls) The unit is [lvn361hv4](https://www.lg.com/ca_en/support/product-support/cs-LVN361HV4.ENWBEUS/) the outdoor unit is [luu350hhv](https://www.lg.com/ca_en/support/product-support/cs-LUU360HHV.EWGBEUS/) some logs. I set fan speeds with no change, i also...

I'll try both those things. But using internal thermistor didn't help in past if I remember correctly.

i just tried playing with fan settings. and still see no change in fan speed, and can confirm that my current meter shows same 316 w draw when its just...

setting it to internal thermistor, did seem to have it activate close to what I would expect, i set it to 72 and the internal thermistor is at 75 and...

~~i think this code change caused pipe temperature in to change. it was reading 9c right before code deployed ,and changed to -5c after , also the pipe out temp...

i think this fixed different bug with pipe temperature i thought i have had. the in and out temp were almost always the same which seemed awful, since applying this...

that def fixed my setpoint issue today, was hard to tell as so hot only got to temp once today

Correct. With code patch system turns compressor on and off as expected using the external temperature sensor. Any ideas on fan speed settings?