mek
mek
Hi @mikenye &all, first of all thx for the great work and documentation. I found some minor thing to improve: https://flightaware.com/adsb/stats/user/ shows the internal IP and port of the local...
power
Hi! Sadly there is no power outlet close by the power meter so I would primary look at a self contained solution and then for one which has some good...
Hi! https://github.com/kismetwireless/kismet/tree/master/log_tools shows at the end to use: --strongest-location but that seems now to be strongest point > usage: kismet_log_to_kml.py [-h] [--in INFILE] [--out OUTFILE] > [--start-time STARTTIME] [--min-signal MINSIGNAL]...
Hi! I tried it on a Rpi3b, but I did not manage to boot from iSCSI. What are the pre requirements to be configured to get this to work? I...
I wonder, if it could be a cli option to use Modbus RTU over TCP. Sure the readme has an example for socat, but it would be more handy if...
Hi! Piaware reports back the internal IP address and exposes that as a link on the users flightaware page. https://flightaware.com/adsb/stats/user/ shows the internal IP and port of the local webinterface...
It would be cool if * two sensors can be paired with each other to show the remote value. like place one display outside (showing its own temperature) but also...
referring to https://github.com/traviscross/mtr/issues/298 @rewolff it would be good to quote what would be reasonable values and also what else might cause this behaviour or what could improve it. ``` #...