mmatousek89

asigning one analog input to two functions is considered as eror by tunerstudio

1

when i asign AV5 for example to oil pressure and aux linear1 its considered as config error by tunerstudio i dont see point why it should be error i have...

microRusEFI doesnt connect as both mass storage devices (proxied SD and .ini drive)

11

MRE doesnt connect as mass storage on one computer but it does on other computer.

launch control for autocross on micro rusefi

5

user input to ecu: 'launch button' AV9 with 10k pullup connected via push button to gnd 'launch strenght control' AV8 connected to 10k potentiometer as voltage divider to get 0-5V...

input pin raw voltage view

5

i would love to see somewhere analog input pin value as can be measured by voltmeter on ecu pin, not affected by any setting just pure value as MCU see...

gp pwm 'acc pedal'

1

if i select pedal as source of y axis it goes to 100percent imidiatelly and dont follow pedal position