Max Korbel

Binary Counter

2

### Motivation Configurable counters are useful! ### Desired solution - Reset with reset value - Saturation value (maximum value) - Saturation behavior (overflow vs. hold at saturated value) - Enable...

### Describe the bug The `PNSE` port is optional in the APB spec, but not in the `ApbInterface`. Review the spec and look for any other ports that are optional...

### Motivation There's sometimes useful information worth adding to the confapp for components, for example: - A link to a generated example schematic - A link to the original Dart/ROHD...

### Motivation People may save a configuration a JSON then want to: - Restore a configuration in the confapp - Modify settings via the JSON rather than the UI (e.g....

### Motivation It would be great to be able to experiment with the functionality of a component live in-browser using the ROHD-HCL web configuration app. ### Desired solution Some thoughts:...

### Motivation Implement a flexible, configurable CRC generator component ### Desired solution See https://en.wikipedia.org/wiki/Cyclic_redundancy_check The CRC generator should be extremely configurable to generate practically any CRC that may be needed....

### Motivation The APB spec includes a table describing which signals are optional or not based on APB version. It would be helpful for users to have a mechanism to...

LFSR

2

### Motivation LFSRs are useful as pseudo-random deterministic generators in hardware. ### Desired solution Implement a Linear-feedback shift register (LFSR) in ROHD HCL ### Alternatives considered _No response_ ### Additional...

### Motivation Since both `OneHotToBinary` and `BinaryToOneHot` have one input and one output, it would be nice to access them with an API on top of `Logic` and `LogicValue` to...

### Motivation Some RF implementations allow strobing/byte enable on the read side in addition to the write side. This can be helpful for latch-based memory when writing different portions of...