mk-maddin

Results 7 comments of mk-maddin

allow --insecure to skip hostname matching

Any progress on this? I am facing exactly this issue here :/

RP2040 MCU does not connect until reset is pressed

@PatrikTheDev I was able to resolve this issue by flashing with the following options - Klipper v0.11.0-221-g6ce2bd61 ![2023-06-16 10_04_49-C__Users_kraem_Nextcloud_offline_documents_3DPrint_020_printers_annex_trad_rack_](https://github.com/FYSETC/FYSETC-ERB/assets/46523240/19e0923c-470b-4fd3-b3df-db14f88396e7)

RP2040 MCU does not connect until reset is pressed

ok...maybe I was a bit too fast - I am now running into "Timeout on wait for 'tmcuart_response' response" error on like every seconds stepper_buzz command Re-flashing with the default...

RP2040 MCU does not connect until reset is pressed

No not yet ... I am not using CanBus at all at the moment and after reading through the CanBoot guideline, to be truth I have no idea how to...

RP2040 MCU does not connect until reset is pressed

To be truth I am not 100% sure if I really see the same issue as the skr pico people describe ... My device does not show at all within...

RP2040 MCU does not connect until reset is pressed

I think I was able to solve the issue for me now by using the same flash procedure as done with the 3D Mellow Fly ERCF Easy BRD board (...

Using [CLI] - Error: Unable to convert `3` to PlugState - Dacia spring

I can confirm - same issue here when dacia spring is unplugged.