mitwave

Hi. Let’s try to enable the log on GW. AT+LOG=1 You can find the Ethernet packet log from GW via USB virtual UART. I’m using ST GW with this server....

Hi. When GW try to connect the internet, GW can’t get the IP from DHCP server. When you find this message in the log, this is Ok. Ethernet starting... Ethernet...

At 1st, I want to confirm... 1. Can you see the status of GW in the Server Web console? 2. Uplink = from device to server and Downlink = from...

Ok. Now, your device could join the LoRaWAN network and you can receive the data from device vi ST GW. What is your problem? Downlink? Would you explain again?

Please, add this command!! I want to use 16ch GW on AS923 (Japan). I tried to add ch on "Networks" -> "Edit network #XXXX" -> "Channels" tab. However, if I...

Hi althischenko. Networks -> General and ADR are set based on this doc. (https://github.com/gotthardp/lorawan-server/blob/master/doc/Regions.md) And ADR setting on device, I never change parameters.  ADR on Profile settings:  I...

Hi althischenko. Yes, I already set extra channels on "Networks" -> Channels Tab. Before receiving "Link ADR Command", my device is using all chs (default join ch (2ch) + extra...

I have one question. >notice, the channels range is set to the full value, but only the EXTRA channels are configured Does this mean I should set 0-7 (or 0-6)...