Tim 'mithro' Ansell comments

Results 1504 comments of


                                            Tim 'mithro' Ansell

Get the hamsterworks minimal-hdmi working on Opsis board

I actually meant https://web.archive.org/web/20190520020602/http://hamsterworks.co.nz/mediawiki/index.php/Minimal_HDMI Minimal HDMI - Hamsterworks Wiki!

Get memory working with misoc

This issue was moved to timvideos/HDMI2USB-numato-opsis-hardware#2

This was done by florent as part of getting [HDMI2USB misoc firmware](https://github.com/timvideos/HDMI2USB-misoc-firmware) working and has been merged upstream see https://github.com/m-labs/misoc/blob/master/misoclib/mem/sdram/phy/s6ddrphy.py#L398

Figure out why serial number reading in the FX2 firmware isn't working on the Opsis

The FX2 dev board doesn't have an I2C EEPROM with a MAC address in it, so that is going to work on that...

Commit EDK example performing the memory test.

This issue was moved to timvideos/HDMI2USB-numato-opsis-hardware#4

Generate an example using the MCB for memory

This issue was moved to timvideos/HDMI2USB-numato-opsis-hardware#3

Commit EDK example using the Gigabit Ethernet

This issue was moved to timvideos/HDMI2USB-numato-opsis-hardware#5

Create a Python library for working with DUH?

FYI -- There are a couple of Python libraries for IPXACT * pyIPXACT - https://github.com/Paebbels/pyIPXACT * ipyxact - https://github.com/olofk/ipyxact

Create a Python library for working with DUH?

A good python library for working with DUH is probably required for FuseSoC integration?

Set up readthedocs

Should use globalfoundries-pdk theme from https://github.com/google/gf180mcu-pdk