misterobotique

I've only posted the commands that I believe are not fully documented or commands that are still unknown. The commands you mentioned including the following work with my air conditioner:...

Yes, `Rd` is also working (forget to add it in the previous table of known and working commands).

Regarding `Rd` response, I would agree with the idea that it is the inverter compressor frequency (Hz). According to ChatGPT, the normal operating frequency range for the compressor in consumer-oriented...

With my Japanese model, the command `F8` returns: **G 8 0 2 0x00 0x00**. Command `F2` returns: **G 2 4 : 0x00 0x80**. Command `F4` returns: **G 4 0 0x00...

@Sonic-Amiga Mixing ASCII and hexadecimal was confusing, sorry. `F8` returns: **02 47 38 30 32 00 00 E1 03**. `F2` returns: **02 47 32 34 3A 80 80 E7 03**....

> @hedgepigdaniel So, i am currently simulating CTXM60RVMA (not exactly, however) . I can connect to this A/C using old "Online controller" app, and i can see: > > *...

I found out what `FR` reports: the louver vertical position setting. |Bytes|Values|Description| |:----|:----|:----| |Byte(0)|G|-| |Byte(1)|R|-| |Byte(2)|?, 0, 1, 2, 3, 4, 5|Swing, "Comfort" mode position, upper position, high middle position,...