Miro

@nosdregamon this does seem to allow you to enable the extension but the tab is still nowhere to be found under img2img:  (Edit) Errors from console: ``` ControlNet preprocessor...

Just ran into this challenge. With the help of Claude 3.5 Sonnet I was able to convert the original `.bat` for Win to `.sh` for Linux. [sd-forge-run-for-ubuntu.zip](https://github.com/user-attachments/files/16482553/sd-forge-run-for-ubuntu.zip) Tested on Ubuntu...

Hi @RoboDurden! Thanks a lot for your quick response. I got good news -- bad news: I flashed the layout following your instructions. The good news is that i was...

I see. My cheap clone is a little different so I used [this article](https://research.kudelskisecurity.com/2020/04/15/swd-part-3-swo-and-nrst/) since it looks exactly the same. Surprisingly it uses exactly the same MCU as the board...

Thanks for all your help again! I've had no success with connecting the RST wire but it may be due to different issue. After a lot of trial and error...

@RoboDurden Sorry to hear that. I think it's due to the error. If it doesn't flash successfully it will keep looping. No sure why you're getting `ERROR flash_loader.c: Write error`...

@YouWishh my problem was using a deleted api-key. Make sure you're using the right api as Pythagora doesn't check for you if the api-key works. It only check if it's...