Damjan Janevski

I'm suspecting that resolving this issue could also help fix #1787

I have NVIDIA GT218M [NVS 3100M] with nouveau driver and openbox. Displays are set like this ``` eDP-1: Mode: 1440x900 Rate: 60.0014 Hz Rotation: None Position: 0x140 Primary: True Enabled:...

After some more fiddling: * Behavior is same with `xfwm4` and `fvwm2` instead of `openbox` * when monitors are 'joined' (extended monitor starts at the pixel that corresponds to primary...

What's the status with this? The patch I made was tested with network short, local and international numbers on multiple operators and countries in North America, Europe and East Africa....

In my case, the error messages are more than 200. It's always a fixed number of messages for a given modem, but different for each modem I tested. It's happening...

> Not all modems supports inbox query via AT commands, so each and every message must be poked by number during startup to avoid leaving messages behind on the SIM....

This bug seems more serious than just `ERROR` messages. A call was originated from the modem right after driver reload, in-between the errors: ``` [2020-06-21 07:18:58] ERROR[11236] at_response.c: [vip1] Error...

@hselasky I object, chan_dongle is absolutely not ready for production with the bugs I described in this thread (https://github.com/wdoekes/asterisk-chan-dongle/issues/97#issuecomment-647191949, https://github.com/wdoekes/asterisk-chan-dongle/issues/97#issuecomment-645049956) They were introduced in the same merge that introduced the...

@hselasky I'm using it on about 20 production systems ranging from raspberry-pi to brand name servers, some of them since long before this fork was created. There are modems sending...

> The issue described only happens during startup. Do you see ERROR messages after startup? Yes, when modem is reset or re-initializes (this can happen after losing carrier network or...