Micha

@revk Maybe related to this issue, if I try to modify the Demand value, I see an error in MQTT:  It refers X50A protocol but I have S21.

I enabled "debug" and "dump". If I understand the implementation correct, you expect Econo and Demand in S21_G7, right? Question: How is the debug output encoded? So what do I...

I had to correct my writing. After a Power reset of the Daikin Unit (complete switch off and on), I see G7 messages, when I modify it in the App....

Here is what I see: 1. I set demand in Faikin Webapp -> rx_G7 shows the set value after a couple of seconds -> I do not see a change...

rx/tx_dump starts with 024 or 025. E.g "0253643632304F03"

Holy shit! I just installed a new faikin on a 2MX unit. I think with Firmware 1.30, Daikin made a major improvement: It was always unclear how the Multi-Split units...

> So, I have firmware 1.28, didnt start the update, as I was to suspicious they change something, which makes the faikin not work anymore (maybe too cautious). What I...

@revk I observed something: With my Single Split, it stops working after a while. But it seems to be something in the AC-Firmware. Let me explain: AC is powered off....

Wahrscheinlich bin ich zu doof: Ich habe alle bekannten Infos im yaml eingetragen und erhalte das: ``` evcc token ev5 -c ./evcc.yaml -l debug [main ] INFO 2024/06/03 12:40:46 evcc...

> Nightly nehmen… Dann kommt `[main ] FATAL 2024/06/03 16:17:05 oauth2: "invalid_grant" "AAD...: The provided JWE is not a valid 5 segment token.\r\nCorrelation ID: c3dff...\r\nTimestamp: 2024-06-03 14:17:05Z\r\n"` Der AccessToken war...