miknai

I get the exact same error...

Here's the terminal output. ``` Found 3 devices === Connected to 18443010D1F77B0E00 >>> MXID: 18443010D1F77B0E00 >>> Cameras: RGB LEFT RIGHT >>> USB speed: UNKNOWN >>> Loading pipeline for: OAK-D-POE ===...

All of them are the latest ones. I have tried the factory reset via network (through device_manager.py UI) as well. 

I tried running with only two camera this time (1-OAK-D-POE and 1-OAK-D-POE-PRO). I physically disconnected the other camera. The program displayed two video stream windows as expected, worked fine for...

Tried running with only one camera this time (1-OAK-D-POE-PRO). It lasted 15 mins and got crushed due to the same error. ``` Found 1 devices === Connected to 18443010D1F77B0E00 >>>...

In summary, 3 cameras => lasted 10 seconds 2 cameras => lasted 4 minutes 1 camera => lasted 15 mins I wanted to use one camera as surveillance monitoring but...

Any updates on this? Is this issue not reproducible on your side?

Is there a good way to prove that this is not caused by insufficient power?

Okay I will try that within a couple of hours and share the results here. => Sorry I haven't tried the watchdog trick yet. I will do that tomorrow. =>...

On my end, even though I run three cameras on separate terminals, I still get the connection drop from the two OAK-D-POE units. I haven't tried the watchdog trick yet.