mikaabra

I tried again now with all-updated steam on fully updated Win10 with yesterdays fall creators update. On an IPv6 only network (with NAT64+DNS64), Steam won't even start. After trying this,...

I use "Modbus over TCP" and not "modbus RTU over TCP" (the gateway I use converts from RTU to standard modbus as well as serialtcp), and looking at that code...

Thanks, I've tried it out but I now get "unknown error occured" when I first try to connect (when I enter the modbus server IP, port, modbus ID and modbus...

Never mind, on a hunch I restarted the entire machine (and not just HA itself) and then it worked to connect. Will try with 1.20 now.

Most of the sensors look fine now, the only one that looks wrong is "reactive wattage". ``` Sensors AC frequency 49.99 Hz Input 1 Amperage 9.0 A Input 1 energy...

Can confirm now that reactive wattage looks much more reasonable. The only thing that shows up in the main overview is: "Firmware: DL1.0ZBAA" This is correct. I tried to turn...