mihai-stanimir

I run 4 printers from my Pi 4 with 4 instances of Octoprint. It would be so cool to be able to configure and jump from one instance to another...

None that I could find. But it seems to quickly reload afterwards. Doing more tests, it doesn't seem to happen with the provided g-code. But with my own slicing of...

Sure. I've attached the GCode from PrusaSlicer 2.4.0 and the output of GFormer after adding one deformation point. Hope this helps. [3DBenchy_0.1mm_PET_MK3S_2h53m.gcode.zip](https://github.com/zalo/GFormer/files/8159990/3DBenchy_0.1mm_PET_MK3S_2h53m.gcode.zip) [one.zip](https://github.com/zalo/GFormer/files/8159991/one.zip)

Still an issue in `0.101.0`