Mickey Mouse

DCP-1512E here :) Similar problem noticed - 1200HQ mode did not print anything. I've set `max_lines_per_block_ = 16`, then recompiled and reinstalled driver and 1200HQ works fine :) Thanks for...

Archer C2 v1 OpenWrt 19.07-SNAPSHOT r11328-81266d9001 The same issue. MESH-SAE-AUTH-FAILURE followed by MESH-SAE-AUTH-BLOCKED for 300 seconds. Without encryption mesh works properly. Archer C7 v5, OpenWrt 19.07.7, r11306-c4a6851c72, encrypted mesh works...

I'm new in mesh configuration. The first try was on Archer C7 v5. I could not get it working on 21.02, so I make downgrade to 19.07 and succesfuly configured...

I have tested C2 with 19.07.7, also 19.07.6 and 19.07.5 does not work with SAE. But all versions have now newer versions of wolfssl library, than mentioned above. I have...

C2 is slower than C7, but the setting is: `#define MESH_AUTH_TIMEOUT 10`

Tak sobie pomyślałem, że powinienem napisać powyżej: HA 2024.3.1 na HA OS 12.1

I would like to confirm what the author of the issue wrote above :) The Remeha Home application looks exactly the same as DeDietrich Smart, the only difference is the...

I tested all subdrivers from `nutdrv_qx` changind options like **norating** and **novendor** if applicable. I tested also: `blazer_usb`, `usbhid-ups` and `nutdrv_atcl_usb` - all without success. As I [found](https://github.com/networkupstools/nut/issues?q=is%3Aissue+is%3Aopen+label%3A%22USB+VID%3D0001+PID%3D0000+%28Fry%27s+Electronics%2FMEC0003%29%22) there is...

> Well, with vendors not even caring to identify their devices properly (so you get a proverbial "cat in a sack"), the "theoretically should work with NUT" part is a...

Cześć. Też tak miałem. W logach nic nie wypatrzyłem ale postanowiłam sprawdzić w przeglądarce. Dostałem komunikat o zbyt wielu próbach logowania i konieczności odczekania 8 godzin. Wyłączyłem integrację na około...