Michal Lenc

Hi @masayuki2009, thanks. I can actually connect to console via telnet (I use imxrt1060-evk:netnsh with write back d-cache and `CONFIG_NETINIT_DHCPC=y` to get IP address)., but you are right. When I...

FInally got some time to take a closer look at this. Still not quite there, but at least I have an idea now where the problem might be. It seems...

> Yes, maybe the way to solve it is passing some parameter in the LCD initialize to indicate the type of LCD, this way we could have more than 1...

Hi @eve-wils. I don't think you are doing something wrong, the problem seems to be in including a python parameter script. Those steps should provide a workaround for diskRT1.dgm example....

> We should not be adding a third image slot without a very good justification, original comment mentions swap using scratch, so just use swap using move instead? But swap...

> > > We should not be adding a third image slot without a very good justification, original comment mentions swap using scratch, so just use swap using move instead?...

Hi @d3zd3z, @utzig, @nvlsianpu. Could you take a look at this? Thanks.

> Regarding the PR, the main issue is not having any patches for the simulator to test the new method, so it would require someone to manually test, and any...

> I do not accept this because you are adding a third slot, this just breaks everything we have in zephyr, likely other OS's too, whilst it might work for...

> Have you tested any of this with the smp_svr sample in zephyr? Have you tried erasing the third slot? The third slot is currently implemented only for NuttX, it...