Micah Morrison

Hi @wpresources, this sounds like more a WireGuard problem than a WS4W problem, but there are a few things you can check. Does this values in the registry get updated?...

Hi @wpresources, I connected and took a look. Your configuration looks fine, but I was also unable to connect to your server from my client. I'm afraid the problem is...

Yeah you're right, that port scanner is not a good test. It also doesn't show the WireGuard port open on my server that currently works. I just remembered that WireGuard...

> Hi I would like to ask for the same Remote Address and Remote Port information as you? https://imgur.com/a/Rhf613G Yep, that looks good to me. Your WireGuard process is listening...

Keep in mind the network range for the WireGuard network must not conflict with your machine's network. It looks like your machine is using `192.168.1.0/24` (CIDR), and WireGuard is using...

Hey @wpresources, I finally had some time to try this out on a Zomro VPS. Believe it or not, WS4W worked right out of the box with no problems! I...

Hey @wpresources, I'm trying to clean up some old issues. Is there anything else I can do to help with this issue? As mentioned in my last comment, I signed...

Hey, thanks for the report! This should be pretty straightforward to fix. Remember that you can always update the client config directly (in the client app or in the exported...

Hi @qwer1304, > If the server's address is an IPv6 (e.g., fd4d:b189:9674::1/64) then Generate from Server button doesn't work and the program hangs. This issue has been fixed in [2.0.2](https://github.com/micahmo/WgServerforWindows/releases/tag/v2.0.2)....

Hi @JLesuperb, it's a slightly different error message, but can you try the workaround described in the README here: https://github.com/micahmo/WireGuardServerForWindows#inability-to-enable-internet-sharing Also keep an eye on #18. That enhancement should hopefully...