mhl66

Sorry, I´ll do my best to reduce your confusion: - It´s a **six-wire** model (seems to be the new standard) - Firmware is **BWC_2.0.0** (mqtt_enabled example in arduino library) from...

Sorry, no luck, exactly the same with and without (=with 0 Ohm) resistors.  Nothing happens at all.

Worse yet, your recommended "dwoosnam" library fails to compile (in contrast to the current version): ``` C:\Program Files (x86)\Arduino\libraries\dwoosnam\BWC_8266.cpp: In member function 'void BWC::_startNTP()': C:\Program Files (x86)\Arduino\libraries\dwoosnam\BWC_8266.cpp:729:33: error: invalid conversion...

Great!!! Sketch compiled, but could not upload LittleFS data, because "authentication failed" (OTA Password "esp8266" enabled)!? (Did not encounter all of this in the current version, but I´m determined to...

Just realized that I hat to use the "Basic_MQTT_with_GPIO" version, not the "Basic" version... stay tuned... I´ll tolerate the MQTT-delay, just want to read out the f... key codes (and...

Got it (don´t ask what went wrong in the meantime). Result: Incredible - some of the key codes changed: ``` NOBTN 1b1b LOCK 0100 TIMER 0300 BUBBLES 1212 UNIT 0a09...

How can I "record data on the CIO port"? Does the ESP need a special log mode? Sorry for the noob question - glad to follow your advice...!? Sorry, don´t...

OK, I understand. Sorry, won´t work. Let´s hope that any other Maldives owner can fill the gap of knowledge. BTW: It´s a great spa, the HydroJet-nozzles produce a powerful massage,...

...shoud read "**extraordinary** program"... [I´ll do my very best!](https://www.youtube.com/watch?v=szMisIXJzYc)

Does not save. Period. Ridiculous.