mfuchs1984
mfuchs1984
Maybe it is only configurabe through the ocpp configuration key `UnlockConnectorOnEVSideDisconnect`?
@premultiply die MeterValues messages ist auf den ersten Blick anders als bswp. bei meinem Bender Charger, es handelt sich hier um ein Array mit 2 Objekten, das erste enthält die...
Je nach Verhalten der Wallboxen ggf. over engineered, aber wäre es nicht am robustesten, mit dem neuesten timestamp anzufangen und dann bis zum ältesten Objekt weiterzumachen und measurands, die noch...
Ocpp 1.6 Specs chapter 7.30 Body Measurement inside body of Charge Point (e.g. Temperature) Cable Measurement taken from cable between EV and Charge Point EV Measurement taken by EV Inlet...
Mit dem PR bleibt das Grundroblem doch bestehen, oder? Da conn.meterUpdated auf conn.clock.Now() gesetzt wird, was definitiv später als die Timestamps ist, wird alles nach dem ersten Objekt in der...
Kann es sein, dass evcc die verfügbaren MeterValuesSampledData nicht verarbeitet, da die wallbox diese in Hochkommata packt? Aus der "configurationKey" Message: `{"readonly": false, "key": "metervaluessampleddata", "value": "'Power.Active.Import', 'Energy.Active.Import.Register'"}`
Something similar should already be possible. Set the goal to 100, stay in PV mode and use the charge plan to set the 80% goal for the next morning.
> yes, thanx! I did not see the "Ankunft" / Min-Ladung %" field :-) I guess this should work... When you use Ankunft it will immediately charge with full speed...
The purpose of Ankunft is to ensure the Car reaches a certain charge level to maintain mobility, so it does not make sense to use PV mode since it would...
Then I'd suggest to use Abfahrt, it will keep the PV mode as long as possible. With battery supported charging, this will utilize the battery. If there is still a...