Mats Engstrom
Mats Engstrom
Pull up or down the A to D pins on the 161's as they are inputs and now don't have a defined voltage level. (You can right click on a...
Add four more input bits on the splitter and connect it/them to something like a four-bit constant 0 or a "no-connect" to get them into high-z mode. That's how I...
Out of curiosity - why is the recommended sample rate 100MS/s for the Full Speed? It is not evenly divisible by the bit rate. The only thing I can think...
Like this or this then? (using a Multiplexer)
Does it work? If it doesn't it's not the right way. :-) One issue here is that you're not keeping busses the same "width". Look at the multiplexer. It has...
A multiplexer has three types of signals - Inputs, Output and Control. The one that you are using is having 1 output and 16 inputs. To be able to select...
In Digital on my Mac I prefer to use the two-finger click to get into the property dialogs, and have the ctrl-normal-click to make the selections "select better" (not really...
Yes. A clock device that output 'n' number of pulses and then stops until triggered again would be nice to have. I tend to often need to manually step through...
I've never really got the break component do anything that I like to do. :) In a design like this I'd like to run 20 clocks (at clock speed or...
[On MacOS] The F7 doesn't do anything regardless if the simulation is stopped or has been started (I've by chance discovered that Start has Space as a shortcut key, something...