mengleia

> @mengleia Please make sure the connections are correct, and that the pull-up requirements are met. https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/peripherals/sd_pullup_requirements.html Thank you for your reply I have Burn the flash voltage selection eFuses...

@mantriyogesh mmc device log  insmod esp32_sdio.ko ---> esp32_sdio: probe of mmc0:0001:1 failed with error -110 Please tell me how to analyze the problem？

@mantriyogesh thank you for your reply, I have successfully loaded the driver. the dts cannot use "non-removable" options.

hi @mantriyogesh Yes, Im using the master branch, but it is not the latest commit. Just now I had the same problem with the latest code test

I did not set up the esp32 development environment, I used ESP-Hosted-NG_release_v1.0.2 firmware. Just now I found that the ssid that could not be scanned before could be scanned, and...

Hello, is there any solution? This problem is very serious, will lead to the user can not connect to the desired AP, multiple searches can not find the AP, now...

@kapilkedawat Thank you for your reply. Do you have the firmware of only sdio with the latest code compiled? Because the compilation environment here is somewhat complicated, I don't want...

Thank you very much. I will give you a reply after testing for some time

@kapilkedawat I used the latest code test, in the latest same environment, I compared the scanning AP of rtl8723bu and esp32, and found that the same AP signal strength difference...

@kapilkedawat 1. Yes, I have an imx8mm development board that uses the rtl8723bu, and I am testing the rtl8723bu and esp32 in the same environment 2. We are using esp32-wroom-32ue,...